home *** CD-ROM | disk | FTP | other *** search
- Path: hades.datashopper.dk!not-for-mail
- From: fribert@datashopper.dk (Kenneth Fribert)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Oktagon SCSI Controller
- Date: 8 Feb 1996 10:07:21 +0100
- Organization: Fribert Consult
- Sender: fribert@zeus.datashopper.dk
- Message-ID: <1127.6611T1407T1621@datashopper.dk>
- References: <310ab236@ramses.fdn.org> <4el0a3$1rbg@news-s01.ny.us.ibm.net><AD39830896687F57C@dal65.metronet.com><597.6610T21T343@vip.cybercity.dk>
- <694.6611T40T2941@datashopper.dk> <645.6611T727T2408@vip.cybercity.dk>
- NNTP-Posting-Host: zeus.datashopper.dk
- X-Newsreader: THOR 2.21 (Amiga;SOUP)
-
-
- As far as I can tell, Hans Henrik Happe wrote to Alle about 'Re: Oktagon SCSI Controller', my reply would then be...
-
- >>>How exactly do you use the rom image without putting it in hardware
- >>>(EPROM)?
- >> By using the 'Expansion'-drawer, and dropping the appropriate icon in it.
- >> This does however demand that you disable autoboot on the controller.
- >I'm new at this Expansion thing. Would someone be kind enougth to send me an
- >EMail with the exact procedure.
-
- If you have the appropriate icon in the expansions drawer, the binddrivers command will activate the belonging board.
-
- >(I have oktagon.device 4.4 in ROM and the board is about 2 years old, and
- >there is no jumper on board to turn of autoboot)
-
- If you don't have that jumper, you can't use the expansion thing.
-
- ---
- | fribert@datashopper.dk kensaga@diku.dk | PGP-key available on request
- | Kenneth Fribert Fido: 2:235/41.33 | C. T. Barfoeds Vej 2, 3. tv
- --------------------------------------------┤ DK-2000 Frederiksberg, Denmark
- Amiga4000/68040@25MHz/18 MB/Hydra Ether/MultiFace III/Toshiba XM5201/Supra 288
-
-